6 tons Mobile Dock Ramp
|OEM & Custmized Products–Based on Customers’ Requests & Working Condition|
|Material & Configuation|
|Working Platform||4mm thick steel panel with8 mm anti-skid steel mesh|
|Guardrail Material||100*50*4 Q235 & 80*40*4 Q235|
|Main Frame||High-str ength rectangular tubes with 250*100*6mmQ235|
|Hydraulic Cylinder||HSG60/90*2 pcs|
|Sealing Rings||Japan NOK|
|Control Method||Manual- control up & down|
|Connecting Pin||45# thermal refining|
|Lip||Thick-16mm, length 300m|
|Tires||700-9 Solid Tires|
|Hydraulic hose||1-φ16-1, high pressure hydraulic tubing, two-layer steel mesh|
|Hydraulic Oil||46# Anti-wear|
|WWelding Spares||Shot-blasting Surface treatment|
1. the general appearance size is as follows (if the customer has special requirements, Then it will be customized):
All products have been tested and debugged before leaving the factory. All technologies meet the design requirements and the hydraulic system does not need to be adjusted.
2. Check the hydraulic system and tires carefully before use, and use them without leakage or low pressure.
3. When using the boarding Ramp, it should be placed on a solid ground. The front-end fixed chain must be firmly fixed with the truck to be transported.
4. The load of the Ramp can only be operated after 1 or 3 times.
Delivery Time: 7-15 days based on different requests & Qty.
Package: Plywood Cases
Shipment: Sea Shipments/ Air Shipment ； Spares by Air or Internation Express.
Delivery Item: EXW-FOB-CIF —As you wish.
Payment:TT: 30% TT Prepayments and 70% balance against Copy of BL or 100% Full payment based on small Value.
LC: 100% LC At Sight